cautionstatic device follow proper e.s.d. handling procedures when working with this part. 0.25 0.010 0.33 0.013 0.40 0.016 0.40 0.016 0.38 0.1 0.015 0.004 0.65 0.1 0.026 0.004 cathode mark 0.13 0.005 0.36 0.1 0.014 0.004 0.20 0.1 0.008 0.004 0.20 0.1 0.008 0.004 0.25 0.1 0.01 0.004 0.33 0.1 0.013 0.004 cathode side electro-optical characteristic ta=25 absolute maximum ratings ta=25 *t<10us polarity recommended solder pad layout anode cathode cautionmoisture sensitive device per jedec level 2a standards parameter max units peak forward current* 60 ma forward current 5 ma power disipation 16 mw storage temperature -40~+100 operating temperature -40~+85 parameter min typ max units test cond peak wavelength x - 0.300 - - if=2ma y - 0.296 - forward voltage - 2.8 3.2 vf if=2ma reverse voltage - - 5 vr ir=100ua luminous intensity - 60 - mcd if=2ma viewing angle - 110 - 2x theta1/2 - emitted color white epoxy lens finish yellow scale : mm [inch] date drawn by 425 n. gary ave. carol stream, il 60188 phone800-278-5666 fax630-315-2150 webwww.lumex.com 0.65(l)*0.38(w)*0.36(h)mm, surface mount top view led, lngan neutral white, yellow lens, tape & reel **the specifications may change at any time without notice due to new materials or product improvement.** confidential information the information contained in this document is the property of lumex inc. except as specifically authorized in writing by lumex inc., the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. chkd by aprvd by page unit *unless otherwise specified tolerances per decimal precision are: x= 1 ( 0.039), x.x= 0.5 ( 0.020), x.xx= 0.25 ( 0.010), x.xxx= 0.127 ( 0.005). lead size= 0.05 ( 0.002), lead length= 0.75 ( 0.030). min= max.= +decimal precision - 0.00 + 0.00 - decimal precision ntf pb part number rev SML-LX0201NWD-TR -- 2017.05.25 1 of 2 c.c. g.y. r.c.
60 sec. max. above 220 c 10 sec. max. 260 c max. 120 sec. max. 4 c/s max. 200 180 time temperature 4 c/s max. 6 c/s max. pre-heating 180~200 c 8.0 + - 0.3 0.1 1.50 + 0.1 0.0 1.75 0.1 3.5 0.05 2 0.05 4 0.1 a a b b cathode mark 0.41 0.03 0.74 0.03 section a-a 0.47 0.03 section b-b anode cathode carrier tape dimension profile scale : mm [inch] date drawn by 425 n. gary ave. carol stream, il 60188 phone800-278-5666 fax630-315-2150 webwww.lumex.com 0.65(l)*0.38(w)*0.36(h)mm, surface mount top view led, lngan neutral white, yellow lens, tape & reel **the specifications may change at any time without notice due to new materials or product improvement.** confidential information the information contained in this document is the property of lumex inc. except as specifically authorized in writing by lumex inc., the holder of this document shall keep all information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to all third parties. chkd by aprvd by page unit *unless otherwise specified tolerances per decimal precision are: x= 1 ( 0.039), x.x= 0.5 ( 0.020), x.xx= 0.25 ( 0.010), x.xxx= 0.127 ( 0.005). lead size= 0.05 ( 0.002), lead length= 0.75 ( 0.030). min= max.= +decimal precision - 0.00 + 0.00 - decimal precision ntf pb part number rev SML-LX0201NWD-TR -- 2017.05.25 2 of 2 c.c. g.y. r.c.
|
